ANATOLIA SONDAJHome / Drill rigs / ANT 10
Portable, easily moved
ANT 10
A compact, portable core drilling unit designed for sites that are hard to reach. At two tonnes and towable behind a pickup, the ANT 10 can be moved and set up by a small crew.
Its compact build is a real advantage where a crawler rig cannot get in, or on sensitive ground where the disturbance caused by a larger machine would not be acceptable.
Delgi kapasitesi
A compact solution that performs on shallow programmes, geotechnical work and first-pass exploration.
Speed, safety and mobility together
Designed for core drilling, the ANT 10 travels quickly behind a towing vehicle and reaches difficult sites by truck, crane or loading ramp. On shallow programmes it aims to be the rig that gets to the collar first and finishes first.
One of the biggest advances in its design is the separate control panel, which frees the operator from the reach of the hydraulic hoses. The operator controls the machine from the clearest and safest viewpoint on site, as the safety rules require.
Its technical strength and the ease of moving it save both time and cost. Low ground impact, easy transport and solid drilling capacity make the ANT 10 a practical and agile answer for exploration and reconnaissance work.
Technical specification
Power unit
| Engine options | Deutz 913 FL6 / Cummins / Ford |
| Maksimum güç | 130–150 hp @ 2.100 dev/dk |
| Motor torku | 532 Nm @ 2.100 dev/dk |
| Control unit | Elektronik (ECM) |
| Fuel tank | 100 L |
Rotation unit
| Hidrolik motor | 55 cc |
| Rod clamping diameter | 90 mm |
| Jaw type | Adaptör / kavrama |
| Design | Developed specifically for this machine |
Mast ve ilerleme
| Operating angle | 0°–90° |
| Feed stroke | 180 cm |
| Pullback capacity | 150 bar / 4.300 kg |
| Thrust capacity | 150 bar / 3.200 kg |
| Mast tipi | Sabit, ayarlanabilir |
| Rod handling | 1.5 m rod pulling capacity |
Wireline vinci
| Operating angle | 0°–90° |
| Free pull force | 21 kN |
| Pull force under load | 3,1 kN |
| Free pulling speed | 130 m/dk |
| Halat | 6 mm, 150 m kapasite |
| Makara | Safety rope sheave |
Hidrolik
| Ana pompa | Rexroth / Kawasaki / Danfoss, 65 cc, 280 bar |
| 2nd gear pump | Casappa / Hema, 25 cc, 180 bar |
| 3rd gear pump | Casappa / Hema, 19 cc, 180 bar |
| Wireline hidromotoru | Brevini / Danfoss, 315 cc |
| Mud pump hydraulic motor | Danfoss / Eaton, 80 cc |
| Cooling | Electric (OMT), dual circuit |
Nakliye
| Total weight | 2 ton |
| Towing | Highway towable, tow bar |
| Lastikler | Suited to site use |
| Loading | Vinç, rampa veya kayar platform |
| Mud pump | Triplex |
| Kumanda paneli | Portable, analogue and digital |
Images of the machine
Not sure which rig you need?
Send us the target depth, the core size, the access roads and the ground conditions, and we will decide together which rig is enough for the job.